High Voltage Inserts
Product finder
The High voltage insert connectors incorporate a 'slide on' coupling and have been designed for use in D-Sub and DIN 41612 mixed layout connectors.
The maximum operating voltage of the high voltage inserts is 2,8 KV.
The inserts are easily clip mounted within the housing and removable using a special extraction tool.
Withstand voltage | ≥ 3,8 KV / 50 Hz |
Operating voltage | ≤ 2,8 KV / 50 Hz |
Contact resistance | |
Current carrying capacity | ≤ 1,5 A DC |
Engagement force | max. 4,5 N |
Separation force | min. 0,2 N |
Mating cycles | > 500 |
Operating temperature range | -55 °C (-67 °F) up to |
Test categories | DIN 40045 / IEC 55/125/56 |
Relative humidity | MIL-STD-202 |
Thermal shock | MIL-STD-202 |
Shock | MIL-STD-202 |
Vibration | MIL-STD-202 |
Housing | Plastic |
Contact pin | Brass |
Contact socket | Copper beryllium / Bronze |
Clip ring | Bronze / Plastic |
All products are RoHS conform. | |
Contact pin | Au |
Contact socket | Au |
Other platings on request. | |
Plug |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Jack |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
top
Some connectors may have a specification that differs from the above mentioned data.
