High Power Inserts
Product finder
The high power insert connectors incorporate a 'slide on' coupling and have been designed for use in D-Sub, DIN 41612 and DIN 43355 mixed layout connectors.
This connector range is suitable for the relevant AWG cables and is available as solder or crimp versions. The maximum current carrying capacity of high power inserts is up to 40 A.
The inserts are easily clip mounted within the housing and removable using a special extraction tool.
High power inserts meet the specification of DIN 41626 part 1 and BS 9525 F 0011.
top
Electrical characteristics
Contact resistance | ≤ 1 mOhm |
Current carrying capacity up to | ≤ 40 A |
top
Mechanical characteristics
Engagement force | max. 10 N |
Separation force | min. 4 N |
Mating cycles | ≥ 500 |
top
Environmental specification
Operating temperature range | -55° C (-67° F) up to |
Test categories | DIN 40045 / IEC 55/125/56 |
Relative humidity | MIL-STD-202 |
Thermal shock | MIL-STD-202 |
Shock | MIL-STD-202 |
Vibration | MIL-STD-202 |
top
Materials
Contact pin | Brass |
Contact socket | Copper Beryllium |
Clip ring | Bronze |
All products are RoHS conform. | |
top
Plating
Contact pin | Au |
Contact socket | Au |
Clip ring | Ni |
Other platings on request. | |
top
Interface dimensions
Plug |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jack |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
top
Some connectors may have a specification that differs from the above mentioned data.
