FME

The FME threaded interface connectors are particularly suitable for vehicle mount antenna applications.

This connector range is suitable for the standard ranges of flexible cables and is also available in PCB and panel mount versions.

The characteristic impedance of the FME coaxial connectors is 50 ohm.

Electrical characteristics

Impedance	50 Ohm
Operating frequency	DC-3 GHz
VSWR-Value	≤ 1,2 (at 2 GHz)
Withstand voltage (depending on cable type)	≥ 1000 V / 50 Hz
Operating voltage (depending on cable type)	≤ 500 V / 50 Hz
Insertion loss	≤ 0,1 dB max. / GHz
Insulation resistance	≥ 5 GOhm
Contact resistance Center contact Outer contact	≤ 10 mOhm ≤ 5 mOhm

Coupling torque	max. 2 Nm (18 in.-lbs)
Mating cycles	> 300

Operating temperature range	-55° C (-67° F) up to +125° C (257° F)
Test categories	DIN 40045 / IEC 55/125/56
Relative humidity	MIL-STD-202 Method 106
Thermal shock	MIL-STD-202 Method 107 Cond.B
Shock	MIL-STD-202 Method 213 Cond.J
Vibration	MIL-STD-202 Method 204 Cond.B
Corrosion	MIL-STD-202 Method 101 Cond.B

Housing	Brass Diecast
Center contact	Brass
Spring loaded contacts	Copper beryllium Bronze
Other metal parts	Brass
Crimp ferrule	Copper Brass
Insulator	PTFE
Gasket	Silicone rubber
All products are RoHS conform.